# OBD-II C0046: Brake Pressure Sensor A/B

> **Quick Answer:** OBD-II fault code C0046 indicates Brake Pressure Sensor A/B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $432–$2376.

- **URL:** https://faultcodes.org/automotive/obd2-c0046
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
A correlation code for the pair of brake pressure sensors A and B, set when their readings do not agree within the expected tolerance. Where C0044 and C0045 flag a single-sensor electrical fault, this code is a plausibility fault: at the same instant both sensors should report consistent pressure (allowing for their known relationship), and a persistent mismatch indicates one sensor has drifted, a hydraulic fault separates the circuits, or a signal is corrupted. The stability and brake modules rely on agreement to trust the pressure reading for stability, brake assist and brake-by-wire control. A fault disables those functions and sets the ABS or brake warning lamp while base braking remains. NHTSA lists C0046 in the J2012 table of its EPS report. No manufacturer documents it publicly.

## Common Symptoms
- ABS or brake warning lamp on
- Stability and assist functions disabled
- Changed brake assist behaviour

## Most Likely Root Causes
- One pressure sensor drifted or biased
- Hydraulic fault separating the circuits
- Signal corruption or wiring fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Pressure Sensors.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Pressure Sensors.
5. Clear fault memory and run a verification cycle to confirm C0046 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $151–$998 | $432–$2376 |
| GBP | £119–£785 | £344–£1892 |
| CAD | CA$203–CA$1340 | CA$580–CA$3190 |
| EUR | €140–€924 | €400–€2200 |
| CHF | CHF 161–CHF 1063 | CHF 528–CHF 2904 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0046?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0046?
DIY replacement parts average $151–$998, while professional service averages $432–$2376.

### Will resetting C0046 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

