FaultCodes.org
C0043OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0043 Fault Code: Brake Pedal Position Sensor Circuit B

OBD-II C0043 (Chassis, ABS & Stability Control): Brake Pedal Position Sensor Circuit B.

Quick AnswerHigh — Service Soon

OBD-II fault code C0043 indicates Brake Pedal Position Sensor Circuit B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$378.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Chassis, ABS & Stability Control
Professional Repair
$43 – $378

What This Fault Code Means

Covers circuit B of the brake pedal position sensor, the redundant second channel that the module cross-checks against channel A (C0042). Dual-channel pedal position sensors provide two independent voltage signals, often with opposite slopes, so the module can detect a single-channel fault by correlation. This code is set when channel B is out of range, open, shorted or does not track channel A within tolerance. It supports brake-by-wire assist, regenerative braking blending and precise stop-lamp and cruise control. A fault can disable assist and cruise functions and set a warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA's EPS report lists C0043 in its J2012 table, and its brake study explains how the module uses the pedal sensor to read driver intent.

Common Symptoms

  • Brake lights stay on or behave oddly
  • Cruise control will not set
  • ABS or brake warning lamp on

Most Likely Root Causes

  • Pedal position sensor channel B out of range
  • Channel A/B signals do not correlate
  • Harness or connector fault

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0043.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Pedal Position Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0043?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Position Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Pedal Position Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm C0043 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $159
Professional Repair (Parts + Labor)$43 – $378

Frequently Asked Questions

Is it safe to keep operating with fault code C0043?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0043?

DIY replacement parts average $16–$159, while professional service averages $43–$378.

Will resetting C0043 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0043 fault code meaningC0043 repair costhow to fix C0043

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0043 Fault Code: Brake Pedal Position Sensor Circuit B | FaultCodes.org