# OBD-II C0043: Brake Pedal Position Sensor Circuit B

> **Quick Answer:** OBD-II fault code C0043 indicates Brake Pedal Position Sensor Circuit B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$378.

- **URL:** https://faultcodes.org/automotive/obd2-c0043
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers circuit B of the brake pedal position sensor, the redundant second channel that the module cross-checks against channel A (C0042). Dual-channel pedal position sensors provide two independent voltage signals, often with opposite slopes, so the module can detect a single-channel fault by correlation. This code is set when channel B is out of range, open, shorted or does not track channel A within tolerance. It supports brake-by-wire assist, regenerative braking blending and precise stop-lamp and cruise control. A fault can disable assist and cruise functions and set a warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA's EPS report lists C0043 in its J2012 table, and its brake study explains how the module uses the pedal sensor to read driver intent.

## Common Symptoms
- Brake lights stay on or behave oddly
- Cruise control will not set
- ABS or brake warning lamp on

## Most Likely Root Causes
- Pedal position sensor channel B out of range
- Channel A/B signals do not correlate
- Harness or connector fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Position Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Pedal Position Sensor.
5. Clear fault memory and run a verification cycle to confirm C0043 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$159 | $43–$378 |
| GBP | £13–£125 | £34–£301 |
| CAD | CA$22–CA$213 | CA$58–CA$508 |
| EUR | €15–€147 | €40–€350 |
| CHF | CHF 17–CHF 169 | CHF 53–CHF 462 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0043?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0043?
DIY replacement parts average $16–$159, while professional service averages $43–$378.

### Will resetting C0043 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

