FaultCodes.org
C0042OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0042 Fault Code: Brake Pedal Position Sensor Circuit A

OBD-II C0042 (Chassis, ABS & Stability Control): Brake Pedal Position Sensor Circuit A.

Quick AnswerHigh — Service Soon

OBD-II fault code C0042 indicates Brake Pedal Position Sensor Circuit A. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$378.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Chassis, ABS & Stability Control
Professional Repair
$43 – $378

What This Fault Code Means

Covers circuit A of the brake pedal position sensor, which reports how far the pedal is pressed rather than just on/off like a switch. The brake or stability module uses this analog signal for brake-by-wire assist, regenerative braking blending and precise stop-lamp and cruise control. The module sets the code for a signal outside the valid voltage range, an open or short, or a value that disagrees with the pedal switch or a second sensor channel. Chrysler documents C0042 on 2015-2017 Durango and Grand Cherokee alongside P0572, with the brake lamps remaining lit or cruise control failing to engage, and prescribes checking and relearning the pedal rest position. A fault can disable assist and cruise functions and set a warning lamp.

Common Symptoms

  • Brake lights stay on
  • Cruise control will not set
  • ABS or brake warning lamp on

Most Likely Root Causes

  • Pedal position sensor out of range
  • Pedal home position not learned
  • Harness or connector fault

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0042.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Pedal Position Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0042?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Position Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Pedal Position Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm C0042 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $159
Professional Repair (Parts + Labor)$43 – $378

Frequently Asked Questions

Is it safe to keep operating with fault code C0042?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0042?

DIY replacement parts average $16–$159, while professional service averages $43–$378.

Will resetting C0042 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0042 fault code meaningC0042 repair costhow to fix C0042

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0042 Fault Code: Brake Pedal Position Sensor Circuit A | FaultCodes.org