# OBD-II C0042: Brake Pedal Position Sensor Circuit A

> **Quick Answer:** OBD-II fault code C0042 indicates Brake Pedal Position Sensor Circuit A. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$378.

- **URL:** https://faultcodes.org/automotive/obd2-c0042
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers circuit A of the brake pedal position sensor, which reports how far the pedal is pressed rather than just on/off like a switch. The brake or stability module uses this analog signal for brake-by-wire assist, regenerative braking blending and precise stop-lamp and cruise control. The module sets the code for a signal outside the valid voltage range, an open or short, or a value that disagrees with the pedal switch or a second sensor channel. Chrysler documents C0042 on 2015-2017 Durango and Grand Cherokee alongside P0572, with the brake lamps remaining lit or cruise control failing to engage, and prescribes checking and relearning the pedal rest position. A fault can disable assist and cruise functions and set a warning lamp.

## Common Symptoms
- Brake lights stay on
- Cruise control will not set
- ABS or brake warning lamp on

## Most Likely Root Causes
- Pedal position sensor out of range
- Pedal home position not learned
- Harness or connector fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Position Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Pedal Position Sensor.
5. Clear fault memory and run a verification cycle to confirm C0042 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$159 | $43–$378 |
| GBP | £13–£125 | £34–£301 |
| CAD | CA$22–CA$213 | CA$58–CA$508 |
| EUR | €15–€147 | €40–€350 |
| CHF | CHF 17–CHF 169 | CHF 53–CHF 462 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0042?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0042?
DIY replacement parts average $16–$159, while professional service averages $43–$378.

### Will resetting C0042 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

