C0041 Fault Code: Brake Pedal Switch B
OBD-II C0041 (Chassis, ABS & Stability Control): Brake Pedal Switch B.
OBD-II fault code C0041 indicates Brake Pedal Switch B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$194.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Easy (Basic Tools)
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $43 – $194
What This Fault Code Means
Covers brake pedal switch B, the redundant second brake switch used to cross-check brake pedal switch A. The two switches change state in a defined pattern as the pedal is applied; the module compares them and sets this code when switch B is stuck, open, shorted or disagrees with switch A. The redundant signal supports driver-assist features that must reliably know whether the driver is braking. Honda documents DTC C0041-14 as a brake switch fault that, together with resting a foot on the pedal, can falsely trigger the adaptive-cruise, collision-mitigation and lane-/road-departure warning indicators. A fault can disable those assist functions and illuminate warning lamps; stop lamps may be affected depending on wiring.
Common Symptoms
- Driver-assist features disabled or false triggers
- Cruise or adaptive cruise will not set
- Warning lamp or driver message
Most Likely Root Causes
- Brake switch failed or misadjusted
- Open or shorted switch wiring
- Corroded or loose connector
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C0041.
- 2Inspect electrical connectors, fuses, and harnesses connected to Brake Pedal Switch B.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C0041?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Switch B.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Brake Pedal Switch B.
- 5Clear fault memory and run a verification cycle to confirm C0041 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $16 – $82 |
| Professional Repair (Parts + Labor) | $43 – $194 |
Frequently Asked Questions
Is it safe to keep operating with fault code C0041?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C0041?
DIY replacement parts average $16–$82, while professional service averages $43–$194.
Will resetting C0041 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)