# OBD-II C0041: Brake Pedal Switch B

> **Quick Answer:** OBD-II fault code C0041 indicates Brake Pedal Switch B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$194.

- **URL:** https://faultcodes.org/automotive/obd2-c0041
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Easy (Basic Tools)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers brake pedal switch B, the redundant second brake switch used to cross-check brake pedal switch A. The two switches change state in a defined pattern as the pedal is applied; the module compares them and sets this code when switch B is stuck, open, shorted or disagrees with switch A. The redundant signal supports driver-assist features that must reliably know whether the driver is braking. Honda documents DTC C0041-14 as a brake switch fault that, together with resting a foot on the pedal, can falsely trigger the adaptive-cruise, collision-mitigation and lane-/road-departure warning indicators. A fault can disable those assist functions and illuminate warning lamps; stop lamps may be affected depending on wiring.

## Common Symptoms
- Driver-assist features disabled or false triggers
- Cruise or adaptive cruise will not set
- Warning lamp or driver message

## Most Likely Root Causes
- Brake switch failed or misadjusted
- Open or shorted switch wiring
- Corroded or loose connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Switch B.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Pedal Switch B.
5. Clear fault memory and run a verification cycle to confirm C0041 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$82 | $43–$194 |
| GBP | £13–£65 | £34–£155 |
| CAD | CA$22–CA$110 | CA$58–CA$261 |
| EUR | €15–€76 | €40–€180 |
| CHF | CHF 17–CHF 87 | CHF 53–CHF 238 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0041?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0041?
DIY replacement parts average $16–$82, while professional service averages $43–$194.

### Will resetting C0041 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

