FaultCodes.org
C003DOBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C003D Fault Code: Rear Wheel Speed Sensor

OBD-II C003D (Chassis, ABS & Stability Control): Rear Wheel Speed Sensor.

Quick AnswerHigh — Service Soon

OBD-II fault code C003D indicates Rear Wheel Speed Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$432.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Chassis, ABS & Stability Control
Professional Repair
$65 – $432

What This Fault Code Means

Covers a single rear wheel speed sensor on vehicles that use one combined rear speed signal, for example a rear axle or differential-mounted sensor, instead of separate left and right rear sensors. It reports rear rotation to the ABS/ESC module for anti-lock, traction and stability control and electronic brake-force distribution. The module monitors the circuit for opens, shorts to power or ground, a signal outside the valid range and a missing signal while moving. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA's EPS safety report carries C003D as the rear wheel speed sensor in its J2012 table.

Common Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Speedometer may read erratically

Most Likely Root Causes

  • Rear wheel speed sensor failed
  • Open, shorted or chafed sensor wiring
  • Corroded sensor connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C003D.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Rear Wss.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C003D?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Rear Wss.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Rear Wss.
  5. 5Clear fault memory and run a verification cycle to confirm C003D does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$23 – $181
Professional Repair (Parts + Labor)$65 – $432

Frequently Asked Questions

Is it safe to keep operating with fault code C003D?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C003D?

DIY replacement parts average $23–$181, while professional service averages $65–$432.

Will resetting C003D fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C003D fault code meaningC003D repair costhow to fix C003D

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C003D Fault Code: Rear Wheel Speed Sensor — Causes, Fixes & Cost | FaultCodes.org