# OBD-II C003D: Rear Wheel Speed Sensor

> **Quick Answer:** OBD-II fault code C003D indicates Rear Wheel Speed Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$432.

- **URL:** https://faultcodes.org/automotive/obd2-c003d
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers a single rear wheel speed sensor on vehicles that use one combined rear speed signal, for example a rear axle or differential-mounted sensor, instead of separate left and right rear sensors. It reports rear rotation to the ABS/ESC module for anti-lock, traction and stability control and electronic brake-force distribution. The module monitors the circuit for opens, shorts to power or ground, a signal outside the valid range and a missing signal while moving. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA's EPS safety report carries C003D as the rear wheel speed sensor in its J2012 table.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Speedometer may read erratically

## Most Likely Root Causes
- Rear wheel speed sensor failed
- Open, shorted or chafed sensor wiring
- Corroded sensor connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rear Wss.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rear Wss.
5. Clear fault memory and run a verification cycle to confirm C003D does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$181 | $65–$432 |
| GBP | £18–£143 | £52–£344 |
| CAD | CA$30–CA$244 | CA$87–CA$580 |
| EUR | €21–€168 | €60–€400 |
| CHF | CHF 24–CHF 193 | CHF 79–CHF 528 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C003D?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C003D?
DIY replacement parts average $23–$181, while professional service averages $65–$432.

### Will resetting C003D fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

