FaultCodes.org
C003COBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C003C Fault Code: Rear Tone Wheel

OBD-II C003C (Chassis, ABS & Stability Control): Rear Tone Wheel.

Quick AnswerHigh — Service Soon

OBD-II fault code C003C indicates Rear Tone Wheel. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$756.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Chassis, ABS & Stability Control
Professional Repair
$108 – $756

What This Fault Code Means

Covers a single rear tone wheel (reluctor or encoder ring) on vehicles that use one combined rear wheel speed signal, for example from a differential or rear axle sensor, rather than separate left and right rear rings. It is a signal-plausibility code set when the module sees an erratic, noisy or intermittent rear speed signal consistent with a damaged, contaminated or loose tone ring rather than a sensor circuit failure. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains; on such vehicles rear-based functions like electronic brake-force distribution are affected. No manufacturer documents this code publicly; NHTSA's EPS safety report lists the rear tone wheel code C003C among the J2012 wheel speed codes.

Common Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Intermittent rear speed signal

Most Likely Root Causes

  • Damaged or contaminated tone ring
  • Loose or displaced bearing or axle ring
  • Excessive sensor-to-ring air gap

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C003C.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Rear Tone Wheel.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C003C?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Rear Tone Wheel.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Rear Tone Wheel.
  5. 5Clear fault memory and run a verification cycle to confirm C003C does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$38 – $318
Professional Repair (Parts + Labor)$108 – $756

Frequently Asked Questions

Is it safe to keep operating with fault code C003C?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C003C?

DIY replacement parts average $38–$318, while professional service averages $108–$756.

Will resetting C003C fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C003C fault code meaningC003C repair costhow to fix C003C

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C003C Fault Code: Rear Tone Wheel — Causes, Fixes & Cost | FaultCodes.org