# OBD-II C003C: Rear Tone Wheel

> **Quick Answer:** OBD-II fault code C003C indicates Rear Tone Wheel. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$756.

- **URL:** https://faultcodes.org/automotive/obd2-c003c
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers a single rear tone wheel (reluctor or encoder ring) on vehicles that use one combined rear wheel speed signal, for example from a differential or rear axle sensor, rather than separate left and right rear rings. It is a signal-plausibility code set when the module sees an erratic, noisy or intermittent rear speed signal consistent with a damaged, contaminated or loose tone ring rather than a sensor circuit failure. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains; on such vehicles rear-based functions like electronic brake-force distribution are affected. No manufacturer documents this code publicly; NHTSA's EPS safety report lists the rear tone wheel code C003C among the J2012 wheel speed codes.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Intermittent rear speed signal

## Most Likely Root Causes
- Damaged or contaminated tone ring
- Loose or displaced bearing or axle ring
- Excessive sensor-to-ring air gap

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rear Tone Wheel.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rear Tone Wheel.
5. Clear fault memory and run a verification cycle to confirm C003C does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$318 | $108–$756 |
| GBP | £30–£250 | £86–£602 |
| CAD | CA$51–CA$426 | CA$145–CA$1015 |
| EUR | €35–€294 | €100–€700 |
| CHF | CHF 40–CHF 338 | CHF 132–CHF 924 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C003C?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C003C?
DIY replacement parts average $38–$318, while professional service averages $108–$756.

### Will resetting C003C fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

