C003A Fault Code: Right Rear Wheel Speed Sensor
OBD-II C003A (Chassis, ABS & Stability Control): Right Rear Wheel Speed Sensor.
OBD-II fault code C003A indicates Right Rear Wheel Speed Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$432.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Moderate (Intermediate)
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $65 – $432
What This Fault Code Means
Covers the right rear wheel speed sensor and its circuit, completing the four-corner sensor set with C0031, C0034 and C0037. The active sensor reports rear wheel rotation to the ABS/ESC module for anti-lock, traction and stability control and electronic brake-force distribution. The module monitors the circuit for opens, shorts to power or ground, a signal outside the valid range and a missing signal while moving. Ford documents C003A with C0036 and C0037 on 2021 Bronco and Ranger vehicles built in a specific window, with an illuminated ABS warning. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains available.
Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Speedometer may read erratically
Most Likely Root Causes
- Wheel speed sensor bent or failed
- Open, shorted or chafed sensor wiring
- Corroded sensor connector
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C003A.
- 2Inspect electrical connectors, fuses, and harnesses connected to Rr Wss.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C003A?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Rr Wss.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Rr Wss.
- 5Clear fault memory and run a verification cycle to confirm C003A does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $23 – $181 |
| Professional Repair (Parts + Labor) | $65 – $432 |
Frequently Asked Questions
Is it safe to keep operating with fault code C003A?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C003A?
DIY replacement parts average $23–$181, while professional service averages $65–$432.
Will resetting C003A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)