# OBD-II C003A: Right Rear Wheel Speed Sensor

> **Quick Answer:** OBD-II fault code C003A indicates Right Rear Wheel Speed Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$432.

- **URL:** https://faultcodes.org/automotive/obd2-c003a
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the right rear wheel speed sensor and its circuit, completing the four-corner sensor set with C0031, C0034 and C0037. The active sensor reports rear wheel rotation to the ABS/ESC module for anti-lock, traction and stability control and electronic brake-force distribution. The module monitors the circuit for opens, shorts to power or ground, a signal outside the valid range and a missing signal while moving. Ford documents C003A with C0036 and C0037 on 2021 Bronco and Ranger vehicles built in a specific window, with an illuminated ABS warning. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains available.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Speedometer may read erratically

## Most Likely Root Causes
- Wheel speed sensor bent or failed
- Open, shorted or chafed sensor wiring
- Corroded sensor connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rr Wss.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rr Wss.
5. Clear fault memory and run a verification cycle to confirm C003A does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$181 | $65–$432 |
| GBP | £18–£143 | £52–£344 |
| CAD | CA$30–CA$244 | CA$87–CA$580 |
| EUR | €21–€168 | €60–€400 |
| CHF | CHF 24–CHF 193 | CHF 79–CHF 528 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C003A?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C003A?
DIY replacement parts average $23–$181, while professional service averages $65–$432.

### Will resetting C003A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

