FaultCodes.org
C0036OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0036 Fault Code: Left Rear Tone Wheel

OBD-II C0036 (Chassis, ABS & Stability Control): Left Rear Tone Wheel.

Quick AnswerHigh — Service Soon

OBD-II fault code C0036 indicates Left Rear Tone Wheel. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$756.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Chassis, ABS & Stability Control
Professional Repair
$108 – $756

What This Fault Code Means

Covers the left rear tone wheel (reluctor or encoder ring) read by the left rear wheel speed sensor, the rear-axle counterpart of C0030 and C0033. It is a signal-plausibility code set when the module sees an erratic, noisy or intermittent rear speed signal consistent with a damaged, contaminated or loose tone ring rather than a sensor circuit failure. Ford documents C0036 with C0037 and C003A on 2021 Bronco and Ranger vehicles with an illuminated ABS warning. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains; on vehicles that use the rear sensors for electronic brake-force distribution that function is affected too.

Common Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Grinding noise from wheel hub

Most Likely Root Causes

  • Damaged or contaminated tone ring
  • Loose or displaced hub bearing
  • Excessive sensor-to-ring air gap

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0036.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Lr Tone Wheel.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0036?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Lr Tone Wheel.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Lr Tone Wheel.
  5. 5Clear fault memory and run a verification cycle to confirm C0036 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$38 – $318
Professional Repair (Parts + Labor)$108 – $756

Frequently Asked Questions

Is it safe to keep operating with fault code C0036?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0036?

DIY replacement parts average $38–$318, while professional service averages $108–$756.

Will resetting C0036 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0036 fault code meaningC0036 repair costhow to fix C0036

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0036 Fault Code: Left Rear Tone Wheel — Causes, Fixes & Cost | FaultCodes.org