# OBD-II C0036: Left Rear Tone Wheel

> **Quick Answer:** OBD-II fault code C0036 indicates Left Rear Tone Wheel. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$756.

- **URL:** https://faultcodes.org/automotive/obd2-c0036
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the left rear tone wheel (reluctor or encoder ring) read by the left rear wheel speed sensor, the rear-axle counterpart of C0030 and C0033. It is a signal-plausibility code set when the module sees an erratic, noisy or intermittent rear speed signal consistent with a damaged, contaminated or loose tone ring rather than a sensor circuit failure. Ford documents C0036 with C0037 and C003A on 2021 Bronco and Ranger vehicles with an illuminated ABS warning. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains; on vehicles that use the rear sensors for electronic brake-force distribution that function is affected too.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Grinding noise from wheel hub

## Most Likely Root Causes
- Damaged or contaminated tone ring
- Loose or displaced hub bearing
- Excessive sensor-to-ring air gap

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Lr Tone Wheel.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Lr Tone Wheel.
5. Clear fault memory and run a verification cycle to confirm C0036 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$318 | $108–$756 |
| GBP | £30–£250 | £86–£602 |
| CAD | CA$51–CA$426 | CA$145–CA$1015 |
| EUR | €35–€294 | €100–€700 |
| CHF | CHF 40–CHF 338 | CHF 132–CHF 924 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0036?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0036?
DIY replacement parts average $38–$318, while professional service averages $108–$756.

### Will resetting C0036 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

