C0025 Fault Code: Brake Pedal Feedback Pressure Sensor Circuit
OBD-II C0025 (Chassis, ABS & Stability Control): Brake Pedal Feedback Pressure Sensor Circuit.
OBD-II fault code C0025 indicates Brake Pedal Feedback Pressure Sensor Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$2160.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $324 – $2,160
What This Fault Code Means
C0025 covers the pressure sensor on the pedal feedback side of a decoupled or brake-by-wire system, the measuring partner of the feedback valve C0024. In such systems the pedal pushes fluid into a pedal feel simulator via a simulator valve the module can open or close, while separate sensors read pressure in the simulator circuit and in the wheel circuit. A patent for this layout reads the driver's request from a pressure sensor on the master cylinder side and describes a standstill self-test that opens the simulator valve and watches the pressure rise. The module sets C0025 for a signal out of range, an open or short, or a value that does not fit pedal travel. Pedal feel changes, assist may drop to a mechanical fallback, and the brake or ABS lamp lights. No manufacturer documents this code publicly.
Common Symptoms
- Changed or abnormal pedal feel
- Loss of brake assist, driver messages
- ABS or brake warning lamp on
Most Likely Root Causes
- Feedback pressure sensor out of range
- Harness or connector fault
- Internal brake actuation unit fault
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C0025.
- 2Inspect electrical connectors, fuses, and harnesses connected to Brake Pedal Feedback Pressure Sensor.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C0025?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Feedback Pressure Sensor.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Brake Pedal Feedback Pressure Sensor.
- 5Clear fault memory and run a verification cycle to confirm C0025 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $113 – $907 |
| Professional Repair (Parts + Labor) | $324 – $2,160 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: C0025 (Chassis, ABS & Stability Control)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $324 – $2,160
Frequently Asked Questions
Is it safe to keep operating with fault code C0025?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C0025?
DIY replacement parts average $113–$907, while professional service averages $324–$2160.
Will resetting C0025 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)