# OBD-II C0025: Brake Pedal Feedback Pressure Sensor Circuit

> **Quick Answer:** OBD-II fault code C0025 indicates Brake Pedal Feedback Pressure Sensor Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$2160.

- **URL:** https://faultcodes.org/automotive/obd2-c0025
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
C0025 covers the pressure sensor on the pedal feedback side of a decoupled or brake-by-wire system, the measuring partner of the feedback valve C0024. In such systems the pedal pushes fluid into a pedal feel simulator via a simulator valve the module can open or close, while separate sensors read pressure in the simulator circuit and in the wheel circuit. A patent for this layout reads the driver's request from a pressure sensor on the master cylinder side and describes a standstill self-test that opens the simulator valve and watches the pressure rise. The module sets C0025 for a signal out of range, an open or short, or a value that does not fit pedal travel. Pedal feel changes, assist may drop to a mechanical fallback, and the brake or ABS lamp lights. No manufacturer documents this code publicly.

## Common Symptoms
- Changed or abnormal pedal feel
- Loss of brake assist, driver messages
- ABS or brake warning lamp on

## Most Likely Root Causes
- Feedback pressure sensor out of range
- Harness or connector fault
- Internal brake actuation unit fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Pedal Feedback Pressure Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Pedal Feedback Pressure Sensor.
5. Clear fault memory and run a verification cycle to confirm C0025 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$907 | $324–$2160 |
| GBP | £89–£714 | £258–£1720 |
| CAD | CA$152–CA$1218 | CA$435–CA$2900 |
| EUR | €105–€840 | €300–€2000 |
| CHF | CHF 121–CHF 966 | CHF 396–CHF 2640 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0025?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0025?
DIY replacement parts average $113–$907, while professional service averages $324–$2160.

### Will resetting C0025 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

