C0023 Fault Code: Stop Lamp Control
OBD-II C0023 (Chassis, ABS & Stability Control): Stop Lamp Control.
OBD-II fault code C0023 indicates Stop Lamp Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$432.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Moderate (Intermediate)
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $43 – $432
What This Fault Code Means
Covers the stop lamp (brake light) control circuit as driven or monitored by the brake or stability control module. Modern ABS/ESC systems can command the stop lamps during autonomous braking events such as traction control, stability control and automatic emergency braking, independent of the driver pressing the pedal, and they monitor the circuit for opens, shorts and lamp-output disagreement. The code is stored when the commanded stop lamp state does not match the measured output or the circuit is faulty. Effects range from stop lamps that stay on or off to disabled driver-assist functions that rely on brake-light actuation. Mazda stores C0023:14 as a brake light circuit malfunction and names a retrofitted brake light flasher as one trigger (service alert SA-041-26). NHTSA's brake study lists brake lights on/off as a CHB output.
Common Symptoms
- Stop lamps stay on or do not light
- Stability or driver-assist functions disabled
- ABS or stability warning lamp on
Most Likely Root Causes
- Open or shorted stop lamp wiring
- Failed lamp or output driver
- Faulty brake switch signal
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C0023.
- 2Inspect electrical connectors, fuses, and harnesses connected to Stop Lamp Control Circuit.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C0023?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Stop Lamp Control Circuit.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Stop Lamp Control Circuit.
- 5Clear fault memory and run a verification cycle to confirm C0023 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $16 – $181 |
| Professional Repair (Parts + Labor) | $43 – $432 |
Frequently Asked Questions
Is it safe to keep operating with fault code C0023?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C0023?
DIY replacement parts average $16–$181, while professional service averages $43–$432.
Will resetting C0023 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)