# OBD-II C0023: Stop Lamp Control

> **Quick Answer:** OBD-II fault code C0023 indicates Stop Lamp Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$432.

- **URL:** https://faultcodes.org/automotive/obd2-c0023
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the stop lamp (brake light) control circuit as driven or monitored by the brake or stability control module. Modern ABS/ESC systems can command the stop lamps during autonomous braking events such as traction control, stability control and automatic emergency braking, independent of the driver pressing the pedal, and they monitor the circuit for opens, shorts and lamp-output disagreement. The code is stored when the commanded stop lamp state does not match the measured output or the circuit is faulty. Effects range from stop lamps that stay on or off to disabled driver-assist functions that rely on brake-light actuation. Mazda stores C0023:14 as a brake light circuit malfunction and names a retrofitted brake light flasher as one trigger (service alert SA-041-26). NHTSA's brake study lists brake lights on/off as a CHB output.

## Common Symptoms
- Stop lamps stay on or do not light
- Stability or driver-assist functions disabled
- ABS or stability warning lamp on

## Most Likely Root Causes
- Open or shorted stop lamp wiring
- Failed lamp or output driver
- Faulty brake switch signal

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Stop Lamp Control Circuit.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Stop Lamp Control Circuit.
5. Clear fault memory and run a verification cycle to confirm C0023 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$181 | $43–$432 |
| GBP | £13–£143 | £34–£344 |
| CAD | CA$22–CA$244 | CA$58–CA$580 |
| EUR | €15–€168 | €40–€400 |
| CHF | CHF 17–CHF 193 | CHF 53–CHF 528 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0023?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0023?
DIY replacement parts average $16–$181, while professional service averages $43–$432.

### Will resetting C0023 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

