FaultCodes.org
C0022OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0022 Fault Code: Brake Booster Solenoid

OBD-II C0022 (Chassis, ABS & Stability Control): Brake Booster Solenoid.

Quick AnswerHigh — Service Soon

OBD-II fault code C0022 indicates Brake Booster Solenoid. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $270–$1944.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Chassis, ABS & Stability Control
Professional Repair
$270 – $1,944

What This Fault Code Means

C0022 covers the solenoid valve of an electronically controllable brake booster. Patent literature shows a vacuum booster that works in two ways: by the driver's pedal in normal braking, and through a solenoid valve that changes the pressure in an auxiliary chamber so the booster applies the brakes without the pedal. NHTSA's brake study describes the conventional vacuum booster, which this valve extends, sitting ahead of the master cylinder. The module checks the coil circuit for opens, shorts and resistance out of range and whether assist follows the command. A fault removes automatic braking and can change pedal effort; the brake or ABS lamp lights. No manufacturer documents this code publicly with a retrievable bulletin.

Common Symptoms

  • Changed brake pedal effort or feel
  • Noise from the brake system
  • ABS or brake warning lamp on

Most Likely Root Causes

  • Solenoid coil open or shorted
  • Corroded connector or chafed wiring
  • Internal booster assembly fault

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0022.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Booster Solenoid.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0022?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Booster Solenoid.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Booster Solenoid.
  5. 5Clear fault memory and run a verification cycle to confirm C0022 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$95 – $816
Professional Repair (Parts + Labor)$270 – $1,944

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: C0022 (Chassis, ABS & Stability Control)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $270 – $1,944

Frequently Asked Questions

Is it safe to keep operating with fault code C0022?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0022?

DIY replacement parts average $95–$816, while professional service averages $270–$1944.

Will resetting C0022 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0022 fault code meaningC0022 repair costhow to fix C0022

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0022 Fault Code: Brake Booster Solenoid — Causes, Fixes & Cost | FaultCodes.org