# OBD-II C0022: Brake Booster Solenoid

> **Quick Answer:** OBD-II fault code C0022 indicates Brake Booster Solenoid. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $270–$1944.

- **URL:** https://faultcodes.org/automotive/obd2-c0022
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
C0022 covers the solenoid valve of an electronically controllable brake booster. Patent literature shows a vacuum booster that works in two ways: by the driver's pedal in normal braking, and through a solenoid valve that changes the pressure in an auxiliary chamber so the booster applies the brakes without the pedal. NHTSA's brake study describes the conventional vacuum booster, which this valve extends, sitting ahead of the master cylinder. The module checks the coil circuit for opens, shorts and resistance out of range and whether assist follows the command. A fault removes automatic braking and can change pedal effort; the brake or ABS lamp lights. No manufacturer documents this code publicly with a retrievable bulletin.

## Common Symptoms
- Changed brake pedal effort or feel
- Noise from the brake system
- ABS or brake warning lamp on

## Most Likely Root Causes
- Solenoid coil open or shorted
- Corroded connector or chafed wiring
- Internal booster assembly fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Booster Solenoid.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Booster Solenoid.
5. Clear fault memory and run a verification cycle to confirm C0022 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $95–$816 | $270–$1944 |
| GBP | £75–£643 | £215–£1548 |
| CAD | CA$128–CA$1096 | CA$363–CA$2610 |
| EUR | €88–€756 | €250–€1800 |
| CHF | CHF 101–CHF 869 | CHF 330–CHF 2376 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0022?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0022?
DIY replacement parts average $95–$816, while professional service averages $270–$1944.

### Will resetting C0022 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

