C001D Fault Code: Right Rear Outlet Control
OBD-II C001D (Chassis, ABS & Stability Control): Right Rear Outlet Control.
OBD-II fault code C001D indicates Right Rear Outlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $324 – $1,836
What This Fault Code Means
Covers the right rear outlet (release) solenoid valve of the ABS hydraulic modulator, the release counterpart to inlet valve C001C. It opens to dump brake fluid from the right rear caliper or wheel cylinder into the low-pressure accumulator so pressure can fall during an ABS or stability cycle, then closes for reapply. The module monitors the coil circuit for opens, shorts and out-of-range resistance and checks valve response. A confirmed fault disables ABS, traction and stability control and sets the ABS warning lamp while base hydraulic braking remains available. No manufacturer documents this code publicly; NHTSA's brake study and a pump patent describe the release valve that sits beside each apply valve.
Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained
Most Likely Root Causes
- Outlet valve coil open or shorted
- Harness or connector corrosion
- Internal hydraulic modulator fault
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C001D.
- 2Inspect electrical connectors, fuses, and harnesses connected to Rr Abs Outlet Valve.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C001D?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Rr Abs Outlet Valve.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Rr Abs Outlet Valve.
- 5Clear fault memory and run a verification cycle to confirm C001D does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $113 – $771 |
| Professional Repair (Parts + Labor) | $324 – $1,836 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: C001D (Chassis, ABS & Stability Control)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $324 – $1,836
Frequently Asked Questions
Is it safe to keep operating with fault code C001D?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C001D?
DIY replacement parts average $113–$771, while professional service averages $324–$1836.
Will resetting C001D fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)