# OBD-II C001D: Right Rear Outlet Control

> **Quick Answer:** OBD-II fault code C001D indicates Right Rear Outlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.

- **URL:** https://faultcodes.org/automotive/obd2-c001d
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the right rear outlet (release) solenoid valve of the ABS hydraulic modulator, the release counterpart to inlet valve C001C. It opens to dump brake fluid from the right rear caliper or wheel cylinder into the low-pressure accumulator so pressure can fall during an ABS or stability cycle, then closes for reapply. The module monitors the coil circuit for opens, shorts and out-of-range resistance and checks valve response. A confirmed fault disables ABS, traction and stability control and sets the ABS warning lamp while base hydraulic braking remains available. No manufacturer documents this code publicly; NHTSA's brake study and a pump patent describe the release valve that sits beside each apply valve.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained

## Most Likely Root Causes
- Outlet valve coil open or shorted
- Harness or connector corrosion
- Internal hydraulic modulator fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rr Abs Outlet Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rr Abs Outlet Valve.
5. Clear fault memory and run a verification cycle to confirm C001D does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$771 | $324–$1836 |
| GBP | £89–£607 | £258–£1462 |
| CAD | CA$152–CA$1035 | CA$435–CA$2465 |
| EUR | €105–€714 | €300–€1700 |
| CHF | CHF 121–CHF 821 | CHF 396–CHF 2244 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C001D?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C001D?
DIY replacement parts average $113–$771, while professional service averages $324–$1836.

### Will resetting C001D fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

