FaultCodes.org
C0018OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0018 Fault Code: Left Rear Inlet Control

OBD-II C0018 (Chassis, ABS & Stability Control): Left Rear Inlet Control.

Quick AnswerHigh — Service Soon

OBD-II fault code C0018 indicates Left Rear Inlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Chassis, ABS & Stability Control
Professional Repair
$324 – $1,836

What This Fault Code Means

Covers the left rear inlet (apply) solenoid valve of the ABS hydraulic modulator, the rear-axle counterpart of C0010. The module closes this valve to isolate the left rear brake circuit and hold wheel pressure during ABS, traction or stability control, then opens it to reapply pressure. On many vehicles the rear channel also carries electronic brake-force distribution. The module monitors the coil for opens, shorts to supply or ground and resistance outside the calibrated range. A confirmed electrical fault disables ABS and the stability functions and lights the ABS warning lamp while leaving base braking intact. No manufacturer documents this code publicly; NHTSA's brake safety study and a pump patent describe the per-wheel apply valve.

Common Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Normal braking retained

Most Likely Root Causes

  • Inlet valve coil open or shorted
  • Harness or connector corrosion
  • Internal hydraulic modulator fault

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0018.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Lr Abs Inlet Valve.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0018?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Lr Abs Inlet Valve.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Lr Abs Inlet Valve.
  5. 5Clear fault memory and run a verification cycle to confirm C0018 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$113 – $771
Professional Repair (Parts + Labor)$324 – $1,836

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: C0018 (Chassis, ABS & Stability Control)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $324 – $1,836

Frequently Asked Questions

Is it safe to keep operating with fault code C0018?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0018?

DIY replacement parts average $113–$771, while professional service averages $324–$1836.

Will resetting C0018 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0018 fault code meaningC0018 repair costhow to fix C0018

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0018 Fault Code: Left Rear Inlet Control — Causes, Fixes & Cost | FaultCodes.org