# OBD-II C0018: Left Rear Inlet Control

> **Quick Answer:** OBD-II fault code C0018 indicates Left Rear Inlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.

- **URL:** https://faultcodes.org/automotive/obd2-c0018
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the left rear inlet (apply) solenoid valve of the ABS hydraulic modulator, the rear-axle counterpart of C0010. The module closes this valve to isolate the left rear brake circuit and hold wheel pressure during ABS, traction or stability control, then opens it to reapply pressure. On many vehicles the rear channel also carries electronic brake-force distribution. The module monitors the coil for opens, shorts to supply or ground and resistance outside the calibrated range. A confirmed electrical fault disables ABS and the stability functions and lights the ABS warning lamp while leaving base braking intact. No manufacturer documents this code publicly; NHTSA's brake safety study and a pump patent describe the per-wheel apply valve.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained

## Most Likely Root Causes
- Inlet valve coil open or shorted
- Harness or connector corrosion
- Internal hydraulic modulator fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Lr Abs Inlet Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Lr Abs Inlet Valve.
5. Clear fault memory and run a verification cycle to confirm C0018 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$771 | $324–$1836 |
| GBP | £89–£607 | £258–£1462 |
| CAD | CA$152–CA$1035 | CA$435–CA$2465 |
| EUR | €105–€714 | €300–€1700 |
| CHF | CHF 121–CHF 821 | CHF 396–CHF 2244 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0018?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0018?
DIY replacement parts average $113–$771, while professional service averages $324–$1836.

### Will resetting C0018 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

