C0010 Fault Code: Left Front Inlet Control
OBD-II C0010 (Chassis, ABS & Stability Control): Left Front Inlet Control.
OBD-II fault code C0010 indicates Left Front Inlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $324 – $1,836
What This Fault Code Means
Covers the left front inlet (apply) solenoid valve of the ABS hydraulic modulator. During ABS, traction or stability control the module closes this valve to isolate the left front brake circuit from the master cylinder and hold wheel pressure, then opens it to let pressure back in. The module checks the coil for opens, shorts and out-of-range resistance and monitors valve response. GM documents code C0010 (sub-type .5A) setting in the electronic brake control module of 2018-2019 Equinox, Terrain, Envision and Canyon, where it could store falsely and was under engineering review. A fault disables ABS and related functions; the red brake or amber ABS lamp illuminates and conventional braking remains.
Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained
Most Likely Root Causes
- Inlet valve coil open or shorted
- Brake control module fault or false setting
- Harness or connector corrosion
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C0010.
- 2Inspect electrical connectors, fuses, and harnesses connected to Lf Abs Inlet Valve.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C0010?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Lf Abs Inlet Valve.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Lf Abs Inlet Valve.
- 5Clear fault memory and run a verification cycle to confirm C0010 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $113 – $771 |
| Professional Repair (Parts + Labor) | $324 – $1,836 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: C0010 (Chassis, ABS & Stability Control)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $324 – $1,836
Frequently Asked Questions
Is it safe to keep operating with fault code C0010?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C0010?
DIY replacement parts average $113–$771, while professional service averages $324–$1836.
Will resetting C0010 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)