# OBD-II C0010: Left Front Inlet Control

> **Quick Answer:** OBD-II fault code C0010 indicates Left Front Inlet Control. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1836.

- **URL:** https://faultcodes.org/automotive/obd2-c0010
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the left front inlet (apply) solenoid valve of the ABS hydraulic modulator. During ABS, traction or stability control the module closes this valve to isolate the left front brake circuit from the master cylinder and hold wheel pressure, then opens it to let pressure back in. The module checks the coil for opens, shorts and out-of-range resistance and monitors valve response. GM documents code C0010 (sub-type .5A) setting in the electronic brake control module of 2018-2019 Equinox, Terrain, Envision and Canyon, where it could store falsely and was under engineering review. A fault disables ABS and related functions; the red brake or amber ABS lamp illuminates and conventional braking remains.

## Common Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained

## Most Likely Root Causes
- Inlet valve coil open or shorted
- Brake control module fault or false setting
- Harness or connector corrosion

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Lf Abs Inlet Valve.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Lf Abs Inlet Valve.
5. Clear fault memory and run a verification cycle to confirm C0010 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$771 | $324–$1836 |
| GBP | £89–£607 | £258–£1462 |
| CAD | CA$152–CA$1035 | CA$435–CA$2465 |
| EUR | €105–€714 | €300–€1700 |
| CHF | CHF 121–CHF 821 | CHF 396–CHF 2244 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0010?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0010?
DIY replacement parts average $113–$771, while professional service averages $324–$1836.

### Will resetting C0010 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

