FaultCodes.org
C0003OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0003 Fault Code: TCS Control Channel B Valve 1

OBD-II C0003 (Chassis, ABS & Stability Control): TCS Control Channel B Valve 1.

Quick AnswerHigh — Service Soon

OBD-II fault code C0003 indicates TCS Control Channel B Valve 1. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1728.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Chassis, ABS & Stability Control
Professional Repair
$324 – $1,728

What This Fault Code Means

C0003 is the counterpart of C0001 in channel B, the second brake circuit of the modulator. A pump patent for such units shows the layout plainly: two normally open isolation valves and two normally closed priming valves, one of each per circuit, operated by the control unit alongside the apply and release valves when traction control intervenes. Valve 1 of channel B therefore matches the first valve of the other circuit; the published sources do not fix which function carries the number. A coil open or short, a current outside the expected window or a pressure that fails to follow the command sets the code. Traction and stability control are disabled and the warning lamp lights, while ordinary braking is unaffected. No manufacturer documents this code publicly.

Common Symptoms

  • ABS warning lamp on
  • Traction and stability control disabled
  • Normal braking retained without ABS

Most Likely Root Causes

  • Solenoid coil open or shorted
  • Corroded or chafed wiring to the modulator
  • Internal hydraulic modulator fault

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0003.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Tcs Valve B1.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0003?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Tcs Valve B1.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Tcs Valve B1.
  5. 5Clear fault memory and run a verification cycle to confirm C0003 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$113 – $726
Professional Repair (Parts + Labor)$324 – $1,728

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: C0003 (Chassis, ABS & Stability Control)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $324 – $1,728

Frequently Asked Questions

Is it safe to keep operating with fault code C0003?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0003?

DIY replacement parts average $113–$726, while professional service averages $324–$1728.

Will resetting C0003 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0003 fault code meaningC0003 repair costhow to fix C0003

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0003 Fault Code: TCS Control Channel B Valve 1 — Fixes & Cost | FaultCodes.org