# OBD-II C0003: TCS Control Channel B Valve 1

> **Quick Answer:** OBD-II fault code C0003 indicates TCS Control Channel B Valve 1. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $324–$1728.

- **URL:** https://faultcodes.org/automotive/obd2-c0003
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
C0003 is the counterpart of C0001 in channel B, the second brake circuit of the modulator. A pump patent for such units shows the layout plainly: two normally open isolation valves and two normally closed priming valves, one of each per circuit, operated by the control unit alongside the apply and release valves when traction control intervenes. Valve 1 of channel B therefore matches the first valve of the other circuit; the published sources do not fix which function carries the number. A coil open or short, a current outside the expected window or a pressure that fails to follow the command sets the code. Traction and stability control are disabled and the warning lamp lights, while ordinary braking is unaffected. No manufacturer documents this code publicly.

## Common Symptoms
- ABS warning lamp on
- Traction and stability control disabled
- Normal braking retained without ABS

## Most Likely Root Causes
- Solenoid coil open or shorted
- Corroded or chafed wiring to the modulator
- Internal hydraulic modulator fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Tcs Valve B1.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Tcs Valve B1.
5. Clear fault memory and run a verification cycle to confirm C0003 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $113–$726 | $324–$1728 |
| GBP | £89–£571 | £258–£1376 |
| CAD | CA$152–CA$974 | CA$435–CA$2320 |
| EUR | €105–€672 | €300–€1600 |
| CHF | CHF 121–CHF 773 | CHF 396–CHF 2112 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0003?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0003?
DIY replacement parts average $113–$726, while professional service averages $324–$1728.

### Will resetting C0003 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

