B004A Fault Code: Third Row Right Frontal Stage 2 Deployment Control
OBD-II B004A (Body Control, Airbag & Comfort): Third Row Right Frontal Stage 2 Deployment Control.
OBD-II fault code B004A indicates Third Row Right Frontal Stage 2 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1296.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $108 – $1,296
What This Fault Code Means
B004A is the second-stage loop of the right third-row frontal airbag. Stage 2 is a separately ignited charge: Breed's patent shows an inflator whose chambers each carry their own igniter, fired alone, together or with a delay chosen by the controller, and Mercedes-Benz's rear airbag filing allows one deployment device per chamber for sequential filling. No published DTC table, vehicle maker or bulletin connects B004A to a real vehicle. If it appears, the stage 2 circuit of that bag is out of range while stage 1 (B0049) may still be fine; the left-hand equivalent is B0042. Airbag lamp on.
Common Symptoms
- Airbag warning lamp on
- Two-stage inflation for the right third-row seat is lost
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- Open or short only in the stage 2 wiring
- Loose connector in the second-row seatback
- Restraint module configured for equipment the vehicle does not have (wrong part or coding)
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B004A.
- 2Inspect electrical connectors, fuses, and harnesses connected to Third Row Right Frontal Airbag.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B004A?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Third Row Right Frontal Airbag.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Third Row Right Frontal Airbag.
- 5Clear fault memory and run a verification cycle to confirm B004A does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $38 – $544 |
| Professional Repair (Parts + Labor) | $108 – $1,296 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B004A (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $108 – $1,296
Frequently Asked Questions
Is it safe to keep operating with fault code B004A?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B004A?
DIY replacement parts average $38–$544, while professional service averages $108–$1296.
Will resetting B004A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)