# OBD-II B004A: Third Row Right Frontal Stage 2 Deployment Control

> **Quick Answer:** OBD-II fault code B004A indicates Third Row Right Frontal Stage 2 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1296.

- **URL:** https://faultcodes.org/automotive/obd2-b004a
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B004A is the second-stage loop of the right third-row frontal airbag. Stage 2 is a separately ignited charge: Breed's patent shows an inflator whose chambers each carry their own igniter, fired alone, together or with a delay chosen by the controller, and Mercedes-Benz's rear airbag filing allows one deployment device per chamber for sequential filling. No published DTC table, vehicle maker or bulletin connects B004A to a real vehicle. If it appears, the stage 2 circuit of that bag is out of range while stage 1 (B0049) may still be fine; the left-hand equivalent is B0042. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- Two-stage inflation for the right third-row seat is lost
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Open or short only in the stage 2 wiring
- Loose connector in the second-row seatback
- Restraint module configured for equipment the vehicle does not have (wrong part or coding)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Third Row Right Frontal Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Third Row Right Frontal Airbag.
5. Clear fault memory and run a verification cycle to confirm B004A does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$544 | $108–$1296 |
| GBP | £30–£428 | £86–£1032 |
| CAD | CA$51–CA$731 | CA$145–CA$1740 |
| EUR | €35–€504 | €100–€1200 |
| CHF | CHF 40–CHF 580 | CHF 132–CHF 1584 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B004A?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B004A?
DIY replacement parts average $38–$544, while professional service averages $108–$1296.

### Will resetting B004A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

