B0040 Fault Code: Third Row Left Side Airbag Deployment Control
OBD-II B0040 (Body Control, Airbag & Comfort): Third Row Left Side Airbag Deployment Control.
OBD-II fault code B0040 indicates Third Row Left Side Airbag Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $86 – $972
What This Fault Code Means
B0040 is reserved for a side airbag at the left seat of a third row, as found in some seven-seat SUVs and vans; most of them protect that row only with an extended curtain. A Joyson (TK Holdings) patent states its seatback side module may serve any row, third included, and a GM application gives rear-row side bags their own gas generators and allows the rear row to be the third. No maker documents B0040 with this meaning. Earlier GM modules assign it elsewhere: Saab manuals for the 9-5 of 2006 and the 9-3 treat B0040 as low resistance in the driver side airbag loop, under 1.5 ohms with 0.2 tolerance for 2 seconds; bulletin 08-09-41-002H also names it for loose CPA retainers. Airbag lamp on.
Common Symptoms
- Airbag warning lamp on
- Left third-row occupant may lack side airbag protection
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- Poor contact at the side airbag connector of the third-row seat or rear quarter trim
- Lead strained by folding or removing the third-row seat
- Internal fault in the third-row side airbag
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B0040.
- 2Inspect electrical connectors, fuses, and harnesses connected to Third Row Left Side Airbag.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B0040?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Third Row Left Side Airbag.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Third Row Left Side Airbag.
- 5Clear fault memory and run a verification cycle to confirm B0040 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $30 – $408 |
| Professional Repair (Parts + Labor) | $86 – $972 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B0040 (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $86 – $972
Frequently Asked Questions
Is it safe to keep operating with fault code B0040?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B0040?
DIY replacement parts average $30–$408, while professional service averages $86–$972.
Will resetting B0040 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)