# OBD-II B0040: Third Row Left Side Airbag Deployment Control

> **Quick Answer:** OBD-II fault code B0040 indicates Third Row Left Side Airbag Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0040
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0040 is reserved for a side airbag at the left seat of a third row, as found in some seven-seat SUVs and vans; most of them protect that row only with an extended curtain. A Joyson (TK Holdings) patent states its seatback side module may serve any row, third included, and a GM application gives rear-row side bags their own gas generators and allows the rear row to be the third. No maker documents B0040 with this meaning. Earlier GM modules assign it elsewhere: Saab manuals for the 9-5 of 2006 and the 9-3 treat B0040 as low resistance in the driver side airbag loop, under 1.5 ohms with 0.2 tolerance for 2 seconds; bulletin 08-09-41-002H also names it for loose CPA retainers. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- Left third-row occupant may lack side airbag protection
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Poor contact at the side airbag connector of the third-row seat or rear quarter trim
- Lead strained by folding or removing the third-row seat
- Internal fault in the third-row side airbag

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Third Row Left Side Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Third Row Left Side Airbag.
5. Clear fault memory and run a verification cycle to confirm B0040 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$408 | $86–$972 |
| GBP | £24–£321 | £69–£774 |
| CAD | CA$41–CA$548 | CA$116–CA$1305 |
| EUR | €28–€378 | €80–€900 |
| CHF | CHF 32–CHF 435 | CHF 106–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0040?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0040?
DIY replacement parts average $30–$408, while professional service averages $86–$972.

### Will resetting B0040 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

