B0030 Fault Code: Second Row Left Side Airbag Deployment Control
OBD-II B0030 (Body Control, Airbag & Comfort): Second Row Left Side Airbag Deployment Control.
OBD-II fault code B0030 indicates Second Row Left Side Airbag Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $86 – $972
What This Fault Code Means
In J2012 the B003x block covers the second seat row, and B0030 is the left rear side airbag, mounted in the rear door or the outer backrest. Mitsubishi files B0030 under the rear side airbag module LH and sets a short to another circuit after 2 seconds. Mercedes-Benz reads B003013 as an open squib in the left rear sidebag on the A-Class, CLA and GLB, often caused by higher contact resistance at the restraint unit connector (LI54.21-P-070658). The older GM numbering differs: on the 2006 Saab 9-5, B0030 is a passenger side airbag loop whose pin voltage is above 4.1 or below 1.0 volts for 2 seconds, and the Saab 9-3 reads it as a passenger side bag short. The right-hand rear twin is B0038. Airbag lamp on.
Common Symptoms
- Airbag warning lamp on
- Rear left side airbag may not deploy in a side impact
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- Raised contact resistance at the restraint module or rear side airbag connector
- Damaged lead in the rear door transition or rear seat backrest
- Internal fault in the rear left side airbag module
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B0030.
- 2Inspect electrical connectors, fuses, and harnesses connected to Second Row Left Side Airbag.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B0030?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Second Row Left Side Airbag.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Second Row Left Side Airbag.
- 5Clear fault memory and run a verification cycle to confirm B0030 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $30 – $408 |
| Professional Repair (Parts + Labor) | $86 – $972 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B0030 (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $86 – $972
Frequently Asked Questions
Is it safe to keep operating with fault code B0030?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B0030?
DIY replacement parts average $30–$408, while professional service averages $86–$972.
Will resetting B0030 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)