# OBD-II B0030: Second Row Left Side Airbag Deployment Control

> **Quick Answer:** OBD-II fault code B0030 indicates Second Row Left Side Airbag Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0030
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
In J2012 the B003x block covers the second seat row, and B0030 is the left rear side airbag, mounted in the rear door or the outer backrest. Mitsubishi files B0030 under the rear side airbag module LH and sets a short to another circuit after 2 seconds. Mercedes-Benz reads B003013 as an open squib in the left rear sidebag on the A-Class, CLA and GLB, often caused by higher contact resistance at the restraint unit connector (LI54.21-P-070658). The older GM numbering differs: on the 2006 Saab 9-5, B0030 is a passenger side airbag loop whose pin voltage is above 4.1 or below 1.0 volts for 2 seconds, and the Saab 9-3 reads it as a passenger side bag short. The right-hand rear twin is B0038. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- Rear left side airbag may not deploy in a side impact
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Raised contact resistance at the restraint module or rear side airbag connector
- Damaged lead in the rear door transition or rear seat backrest
- Internal fault in the rear left side airbag module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Second Row Left Side Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Second Row Left Side Airbag.
5. Clear fault memory and run a verification cycle to confirm B0030 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$408 | $86–$972 |
| GBP | £24–£321 | £69–£774 |
| CAD | CA$41–CA$548 | CA$116–CA$1305 |
| EUR | €28–€378 | €80–€900 |
| CHF | CHF 32–CHF 435 | CHF 106–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0030?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0030?
DIY replacement parts average $30–$408, while professional service averages $86–$972.

### Will resetting B0030 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

