FaultCodes.org
B0026OBD-IIBody Control, Airbag & ComfortTechnical Reference· Updated: Nov 22, 2026

B0026 Fault Code: Left Side Deployment Stage 2 Loop Open

OBD-II B0026 (Body Control, Airbag & Comfort): Left Side Deployment Stage 2 Loop Open.

Quick AnswerModerate — Plan Repair

OBD-II fault code B0026 indicates Left Side Deployment Stage 2 Loop Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Professional Recommended
System
Body Control, Airbag & Comfort
Professional Repair
$86 – $972

What This Fault Code Means

B0026 is missing from the public J2012 lists. General Motors documents it in older restraint modules with a meaning other than the title: on the 2006 Saab 9-5, B0026 is an open circuit in driver frontal stage 1, set when the measured resistance stays above 4.5 ohms, tolerance 0.2, for 2 seconds; the Saab 9-3 manuals add bytes for an open loop and too high resistance in the same driver circuit. GM bulletin 08-09-41-002H blames loose connector position locks for B0026 on 2005-14 models such as the Cobalt, Pontiac G5 and GMC Envoy. An open second stage of a left side airbag is not publicly documented under this code. If the driver loop is open, the steering wheel airbag may not fire. Airbag lamp on.

Common Symptoms

  • Airbag warning lamp on
  • Depending on the vehicle, the driver airbag may not deploy
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Most Likely Root Causes

  • Airbag connector or its position lock not fully seated (GM 08-09-41-002H)
  • Broken track in the clock spring (driver loop on older GM/Saab)
  • Open squib inside the airbag module

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside B0026.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Driver Side Airbag.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside B0026?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Driver Side Airbag.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Driver Side Airbag.
  5. 5Clear fault memory and run a verification cycle to confirm B0026 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $408
Professional Repair (Parts + Labor)$86 – $972

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: B0026 (Body Control, Airbag & Comfort)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $86 – $972

Frequently Asked Questions

Is it safe to keep operating with fault code B0026?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair B0026?

DIY replacement parts average $30–$408, while professional service averages $86–$972.

Will resetting B0026 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

B0026 fault code meaningB0026 repair costhow to fix B0026

Manufacturer & Technical Reference

OBD-II Technical Reference (Body Control, Airbag & Comfort)

Related Fault Codes

Auto & OBD-II →
B0026 Fault Code: Left Side Deployment Stage 2 Loop Open | FaultCodes.org