# OBD-II B0026: Left Side Deployment Stage 2 Loop Open

> **Quick Answer:** OBD-II fault code B0026 indicates Left Side Deployment Stage 2 Loop Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0026
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0026 is missing from the public J2012 lists. General Motors documents it in older restraint modules with a meaning other than the title: on the 2006 Saab 9-5, B0026 is an open circuit in driver frontal stage 1, set when the measured resistance stays above 4.5 ohms, tolerance 0.2, for 2 seconds; the Saab 9-3 manuals add bytes for an open loop and too high resistance in the same driver circuit. GM bulletin 08-09-41-002H blames loose connector position locks for B0026 on 2005-14 models such as the Cobalt, Pontiac G5 and GMC Envoy. An open second stage of a left side airbag is not publicly documented under this code. If the driver loop is open, the steering wheel airbag may not fire. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- Depending on the vehicle, the driver airbag may not deploy
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Airbag connector or its position lock not fully seated (GM 08-09-41-002H)
- Broken track in the clock spring (driver loop on older GM/Saab)
- Open squib inside the airbag module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Driver Side Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Driver Side Airbag.
5. Clear fault memory and run a verification cycle to confirm B0026 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$408 | $86–$972 |
| GBP | £24–£321 | £69–£774 |
| CAD | CA$41–CA$548 | CA$116–CA$1305 |
| EUR | €28–€378 | €80–€900 |
| CHF | CHF 32–CHF 435 | CHF 106–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0026?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0026?
DIY replacement parts average $30–$408, while professional service averages $86–$972.

### Will resetting B0026 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

