FaultCodes.org
B0023OBD-IIBody Control, Airbag & ComfortTechnical Reference· Updated: Nov 22, 2026

B0023 Fault Code: Left Side Deployment Stage 1 Loop Short to Ground

OBD-II B0023 (Body Control, Airbag & Comfort): Left Side Deployment Stage 1 Loop Short to Ground.

Quick AnswerModerate — Plan Repair

OBD-II fault code B0023 indicates Left Side Deployment Stage 1 Loop Short to Ground. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Professional Recommended
System
Body Control, Airbag & Comfort
Professional Repair
$86 – $972

What This Fault Code Means

B0023 does not appear in the J2012 code lists, which jump from B0022 to B0028, and no carmaker documents it as a ground short of a left side airbag stage. It is documented at General Motors with another meaning: in the Saab 9-4X 2011 manual B0023 is the right roof rail (curtain) airbag loop, with bytes for short to battery (01), short to ground (02), open (04) and resistance above 4.2 or below 1.4 ohms (0D, 0E), each confirmed after 2 seconds. GM bulletin 08-09-41-002H lists B0023 among codes caused by unseated connector position locks on many 2005-14 models. A real ground short in a squib loop can stop deployment, so first read which module and descriptor the scan tool reports. Airbag lamp on.

Common Symptoms

  • Airbag warning lamp on
  • The airbag on the affected loop may not deploy
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Most Likely Root Causes

  • Connector position assurance not engaged, so shorting bars bridge the loop (GM 08-09-41-002H)
  • Chafed lead touching body ground
  • Internal fault in the affected airbag module

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside B0023.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Driver Side Airbag.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside B0023?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Driver Side Airbag.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Driver Side Airbag.
  5. 5Clear fault memory and run a verification cycle to confirm B0023 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $408
Professional Repair (Parts + Labor)$86 – $972

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: B0023 (Body Control, Airbag & Comfort)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $86 – $972

Frequently Asked Questions

Is it safe to keep operating with fault code B0023?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair B0023?

DIY replacement parts average $30–$408, while professional service averages $86–$972.

Will resetting B0023 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

B0023 fault code meaningB0023 repair costhow to fix B0023

Manufacturer & Technical Reference

OBD-II Technical Reference (Body Control, Airbag & Comfort)

Related Fault Codes

Auto & OBD-II →
B0023 Fault Code: Left Side Deployment Stage 1 Loop Short to Ground | FaultCodes.org