# OBD-II B0023: Left Side Deployment Stage 1 Loop Short to Ground

> **Quick Answer:** OBD-II fault code B0023 indicates Left Side Deployment Stage 1 Loop Short to Ground. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0023
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0023 does not appear in the J2012 code lists, which jump from B0022 to B0028, and no carmaker documents it as a ground short of a left side airbag stage. It is documented at General Motors with another meaning: in the Saab 9-4X 2011 manual B0023 is the right roof rail (curtain) airbag loop, with bytes for short to battery (01), short to ground (02), open (04) and resistance above 4.2 or below 1.4 ohms (0D, 0E), each confirmed after 2 seconds. GM bulletin 08-09-41-002H lists B0023 among codes caused by unseated connector position locks on many 2005-14 models. A real ground short in a squib loop can stop deployment, so first read which module and descriptor the scan tool reports. Airbag lamp on.

## Common Symptoms
- Airbag warning lamp on
- The airbag on the affected loop may not deploy
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Connector position assurance not engaged, so shorting bars bridge the loop (GM 08-09-41-002H)
- Chafed lead touching body ground
- Internal fault in the affected airbag module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Driver Side Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Driver Side Airbag.
5. Clear fault memory and run a verification cycle to confirm B0023 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$408 | $86–$972 |
| GBP | £24–£321 | £69–£774 |
| CAD | CA$41–CA$548 | CA$116–CA$1305 |
| EUR | €28–€378 | €80–€900 |
| CHF | CHF 32–CHF 435 | CHF 106–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0023?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0023?
DIY replacement parts average $30–$408, while professional service averages $86–$972.

### Will resetting B0023 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

