B001A Fault Code: Center Frontal Stage 3 Deployment Control
OBD-II B001A (Body Control, Airbag & Comfort): Center Frontal Stage 3 Deployment Control.
OBD-II fault code B001A indicates Center Frontal Stage 3 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$648.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $86 – $648
What This Fault Code Means
B001A closes the first-row center frontal series and stands for a third stage of a middle-seat frontal airbag, matching B0003 for the driver and B0012 for the passenger. No carmaker documents it publicly in this sense. At General Motors the number belongs to the anchor-mounted belt pretensioner on the driver side, a second pretensioner at the belt end fitting that works next to the retractor unit coded B0015. Its limits match the other GM squib loops: a pretensioner loop reading beyond 4.2 ohms or beneath 1.4 ohms for two seconds sets the code, as do shorts and opens. GM bulletins report it on the 2009-11 Impala with a pinched or misrouted pretensioner harness (PIC5396A, 15-NA-074) and on Equinox and Traverse 2018 (PIE0438). On GM vehicles look at the lower belt anchor first. The airbag lamp is on.
Common Symptoms
- Airbag warning lamp on
- On GM the driver anchor pretensioner may not fire
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- On GM vehicles pinched, misrouted or corroded anchor pretensioner harness
- Fault in the third stage loop of a first-row center frontal airbag (J2012 meaning)
- Internal fault in the pretensioner
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B001A.
- 2Inspect electrical connectors, fuses, and harnesses connected to Center Frontal Airbag.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B001A?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Center Frontal Airbag.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Center Frontal Airbag.
- 5Clear fault memory and run a verification cycle to confirm B001A does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $30 – $272 |
| Professional Repair (Parts + Labor) | $86 – $648 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B001A (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $86 – $648
Frequently Asked Questions
Is it safe to keep operating with fault code B001A?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B001A?
DIY replacement parts average $30–$272, while professional service averages $86–$648.
Will resetting B001A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)