# OBD-II B001A: Center Frontal Stage 3 Deployment Control

> **Quick Answer:** OBD-II fault code B001A indicates Center Frontal Stage 3 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$648.

- **URL:** https://faultcodes.org/automotive/obd2-b001a
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B001A closes the first-row center frontal series and stands for a third stage of a middle-seat frontal airbag, matching B0003 for the driver and B0012 for the passenger. No carmaker documents it publicly in this sense. At General Motors the number belongs to the anchor-mounted belt pretensioner on the driver side, a second pretensioner at the belt end fitting that works next to the retractor unit coded B0015. Its limits match the other GM squib loops: a pretensioner loop reading beyond 4.2 ohms or beneath 1.4 ohms for two seconds sets the code, as do shorts and opens. GM bulletins report it on the 2009-11 Impala with a pinched or misrouted pretensioner harness (PIC5396A, 15-NA-074) and on Equinox and Traverse 2018 (PIE0438). On GM vehicles look at the lower belt anchor first. The airbag lamp is on.

## Common Symptoms
- Airbag warning lamp on
- On GM the driver anchor pretensioner may not fire
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- On GM vehicles pinched, misrouted or corroded anchor pretensioner harness
- Fault in the third stage loop of a first-row center frontal airbag (J2012 meaning)
- Internal fault in the pretensioner

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Center Frontal Airbag.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Center Frontal Airbag.
5. Clear fault memory and run a verification cycle to confirm B001A does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$272 | $86–$648 |
| GBP | £24–£214 | £69–£516 |
| CAD | CA$41–CA$365 | CA$116–CA$870 |
| EUR | €28–€252 | €80–€600 |
| CHF | CHF 32–CHF 290 | CHF 106–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B001A?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B001A?
DIY replacement parts average $30–$272, while professional service averages $86–$648.

### Will resetting B001A fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

