B0015 Fault Code: Passenger Knee Airbag Deployment Control
OBD-II B0015 (Body Control, Airbag & Comfort): Passenger Knee Airbag Deployment Control.
OBD-II fault code B0015 indicates Passenger Knee Airbag Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $86–$756.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $86 – $756
What This Fault Code Means
B0015 does not appear in the public J2012 code lists, which assign the passenger knee airbag to B0013. Only General Motors documents the number, as the firing loop of the belt pretensioner built into the driver's retractor. In the Saab 9-4X 2011 manual this pretensioner shares one diagnostic page with B001A, the anchor pretensioner, and both trip when their loop stays outside the allowed resistance band or touches supply or ground for two seconds. On the 2009-11 Impala GM notes that B0015 points to the retractor pretensioner while a second pretensioner sits at the belt anchor (PIC5396A). On an Equinox, a wire under the power seat rubbing on the seat motor set B0014 and B0015 and blew the seat fuse (PIT4898C). A passenger knee airbag under this number is not publicly documented. The airbag lamp is on.
Common Symptoms
- Airbag warning lamp on, sometimes intermittent
- On GM, belt pretensioner may not fire; power seat may fail if the harness is shorted
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- On GM vehicles loose or corroded connector at the driver belt pretensioner
- Harness under the power seat rubbing on frame or seat motor (GM PIT4898C)
- Internal fault in the pretensioner or airbag served by this loop
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B0015.
- 2Inspect electrical connectors, fuses, and harnesses connected to Knee Airbag Module.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B0015?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Knee Airbag Module.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Knee Airbag Module.
- 5Clear fault memory and run a verification cycle to confirm B0015 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $30 – $318 |
| Professional Repair (Parts + Labor) | $86 – $756 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B0015 (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $86 – $756
Frequently Asked Questions
Is it safe to keep operating with fault code B0015?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B0015?
DIY replacement parts average $30–$318, while professional service averages $86–$756.
Will resetting B0015 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)