B0013 Fault Code: Passenger Knee Bolster Deployment Control
OBD-II B0013 (Body Control, Airbag & Comfort): Passenger Knee Bolster Deployment Control.
OBD-II fault code B0013 indicates Passenger Knee Bolster Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$972.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $108 – $972
What This Fault Code Means
B0013 belongs to the knee airbag on the passenger side, which deploys from the lower glovebox area and keeps the passenger's knees and thighs from sliding under the dash. Mercedes-Benz logs B001313 for an open squib of the front passenger kneebag. Ford pairs B0013:1A with the driver knee code B0004 on the 2024 Ranger; the TSB has all four airbag connectors checked, the passenger knee airbag being C2433, and swaps those with the wrong moulding number. GM uses the same number differently: in its later modules B0013 is stage 2 of the driver steering wheel airbag, with the same fault bytes as B0012 (Saab 9-4X 2011, GM 2009 Cobalt coil coverage). So a GM vehicle needs a check at the steering wheel, other makers at the passenger knee airbag. The airbag lamp is on.
Common Symptoms
- Airbag warning lamp on
- Passenger knee airbag (or on GM driver airbag stage 2) may not deploy
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- Faulty connector at the passenger knee airbag (Ford TSB 24-2444)
- On GM vehicles fault in the driver airbag stage 2 loop or clock spring
- Internal fault in the passenger knee airbag
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B0013.
- 2Inspect electrical connectors, fuses, and harnesses connected to Knee Airbag Passenger.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B0013?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Knee Airbag Passenger.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Knee Airbag Passenger.
- 5Clear fault memory and run a verification cycle to confirm B0013 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $38 – $408 |
| Professional Repair (Parts + Labor) | $108 – $972 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B0013 (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $108 – $972
Frequently Asked Questions
Is it safe to keep operating with fault code B0013?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B0013?
DIY replacement parts average $38–$408, while professional service averages $108–$972.
Will resetting B0013 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)