# OBD-II B0013: Passenger Knee Bolster Deployment Control

> **Quick Answer:** OBD-II fault code B0013 indicates Passenger Knee Bolster Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0013
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
B0013 belongs to the knee airbag on the passenger side, which deploys from the lower glovebox area and keeps the passenger's knees and thighs from sliding under the dash. Mercedes-Benz logs B001313 for an open squib of the front passenger kneebag. Ford pairs B0013:1A with the driver knee code B0004 on the 2024 Ranger; the TSB has all four airbag connectors checked, the passenger knee airbag being C2433, and swaps those with the wrong moulding number. GM uses the same number differently: in its later modules B0013 is stage 2 of the driver steering wheel airbag, with the same fault bytes as B0012 (Saab 9-4X 2011, GM 2009 Cobalt coil coverage). So a GM vehicle needs a check at the steering wheel, other makers at the passenger knee airbag. The airbag lamp is on.

## Common Symptoms
- Airbag warning lamp on
- Passenger knee airbag (or on GM driver airbag stage 2) may not deploy
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Faulty connector at the passenger knee airbag (Ford TSB 24-2444)
- On GM vehicles fault in the driver airbag stage 2 loop or clock spring
- Internal fault in the passenger knee airbag

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Knee Airbag Passenger.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Knee Airbag Passenger.
5. Clear fault memory and run a verification cycle to confirm B0013 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$408 | $108–$972 |
| GBP | £30–£321 | £86–£774 |
| CAD | CA$51–CA$548 | CA$145–CA$1305 |
| EUR | €35–€378 | €100–€900 |
| CHF | CHF 40–CHF 435 | CHF 132–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0013?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0013?
DIY replacement parts average $38–$408, while professional service averages $108–$972.

### Will resetting B0013 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

