FaultCodes.org
B0010OBD-IIBody Control, Airbag & ComfortTechnical Reference· Updated: Nov 22, 2026

B0010 Fault Code: Passenger Frontal Stage 1 Deployment Control

OBD-II B0010 (Body Control, Airbag & Comfort): Passenger Frontal Stage 1 Deployment Control.

Quick AnswerModerate — Plan Repair

OBD-II fault code B0010 indicates Passenger Frontal Stage 1 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1404.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Professional Recommended
System
Body Control, Airbag & Comfort
Professional Repair
$108 – $1,404

What This Fault Code Means

The front passenger airbag in the dashboard is normally dual-stage like the driver bag, but it also depends on occupant detection: FMVSS 208 allows it to be suppressed for small occupants and requires a readiness indicator that monitors the system. B0010 reports a fault in the firing loop of its first stage. Mercedes-Benz stores B001013 when the stage 1 squib of the passenger bag is open; Mitsubishi files B0010 under the passenger (assist) airbag module with several fault bytes. A suppressed airbag is not a fault and does not set this code; B0010 means the wiring or squib of stage 1 is electrically out of range. Typical spots are the connector behind the dash panel and harness routed past the glovebox. The passenger bag may not deploy and the airbag lamp stays lit.

Common Symptoms

  • Airbag warning lamp on
  • Front passenger airbag may not deploy in a crash
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Most Likely Root Causes

  • Loose, corroded or unlocked connector at the passenger airbag module
  • Harness damaged during dashboard or glovebox work
  • Internal fault in the passenger airbag module (stage 1 squib)

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside B0010.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Passenger Airbag Module.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside B0010?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Passenger Airbag Module.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Passenger Airbag Module.
  5. 5Clear fault memory and run a verification cycle to confirm B0010 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$38 – $590
Professional Repair (Parts + Labor)$108 – $1,404

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: B0010 (Body Control, Airbag & Comfort)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $108 – $1,404

Frequently Asked Questions

Is it safe to keep operating with fault code B0010?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair B0010?

DIY replacement parts average $38–$590, while professional service averages $108–$1404.

Will resetting B0010 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

B0010 fault code meaningB0010 repair costhow to fix B0010

Manufacturer & Technical Reference

OBD-II Technical Reference (Body Control, Airbag & Comfort)

Related Fault Codes

Auto & OBD-II →
B0010 Fault Code: Passenger Frontal Stage 1 Deployment Control | FaultCodes.org