# OBD-II B0010: Passenger Frontal Stage 1 Deployment Control

> **Quick Answer:** OBD-II fault code B0010 indicates Passenger Frontal Stage 1 Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1404.

- **URL:** https://faultcodes.org/automotive/obd2-b0010
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The front passenger airbag in the dashboard is normally dual-stage like the driver bag, but it also depends on occupant detection: FMVSS 208 allows it to be suppressed for small occupants and requires a readiness indicator that monitors the system. B0010 reports a fault in the firing loop of its first stage. Mercedes-Benz stores B001013 when the stage 1 squib of the passenger bag is open; Mitsubishi files B0010 under the passenger (assist) airbag module with several fault bytes. A suppressed airbag is not a fault and does not set this code; B0010 means the wiring or squib of stage 1 is electrically out of range. Typical spots are the connector behind the dash panel and harness routed past the glovebox. The passenger bag may not deploy and the airbag lamp stays lit.

## Common Symptoms
- Airbag warning lamp on
- Front passenger airbag may not deploy in a crash
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Loose, corroded or unlocked connector at the passenger airbag module
- Harness damaged during dashboard or glovebox work
- Internal fault in the passenger airbag module (stage 1 squib)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Passenger Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Passenger Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0010 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$590 | $108–$1404 |
| GBP | £30–£464 | £86–£1118 |
| CAD | CA$51–CA$792 | CA$145–CA$1885 |
| EUR | €35–€546 | €100–€1300 |
| CHF | CHF 40–CHF 628 | CHF 132–CHF 1716 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0010?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0010?
DIY replacement parts average $38–$590, while professional service averages $108–$1404.

### Will resetting B0010 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

