B0005 Fault Code: Collapsible Steering Column Deployment Control
OBD-II B0005 (Body Control, Airbag & Comfort): Collapsible Steering Column Deployment Control.
OBD-II fault code B0005 indicates Collapsible Steering Column Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1620.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $108 – $1,620
What This Fault Code Means
Some steering columns can change how much energy they soak up while collapsing in a frontal crash. In a Delphi/Nexteer patent a controller fires pyrotechnic actuators that force an absorber strap into a tighter path or couple in extra absorbers, matching the column to driver size and crash severity. B0005 is the restraint module code for the firing loop of such an actuator. Land Rover documents B0005-56, an invalid or incompatible configuration, on the Evoque from 2018 when a replacement restraints control module had received older software than the factory level; a manual patch of the diagnostic equipment fixes it (SSM 74577). FMVSS 204 caps rearward column travel at 127 mm when the car hits a barrier at 48 km/h. With the loop faulted, the column keeps its fixed default behaviour and the airbag lamp is on.
Common Symptoms
- Airbag warning lamp on
- Adaptive energy absorption of the column unavailable, no effect on normal steering
- Safety note: the column actuator is pyrotechnic; leave tests and connector work to a workshop with the battery disconnected
Most Likely Root Causes
- Restraint module configuration or software does not match the vehicle (Land Rover SSM 74577)
- Open or shorted lead to the pyrotechnic column actuator
- Faulty actuator in the steering column
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B0005.
- 2Inspect electrical connectors, fuses, and harnesses connected to Collapsible Steering Column.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B0005?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Collapsible Steering Column.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Collapsible Steering Column.
- 5Clear fault memory and run a verification cycle to confirm B0005 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $38 – $680 |
| Professional Repair (Parts + Labor) | $108 – $1,620 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B0005 (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $108 – $1,620
Frequently Asked Questions
Is it safe to keep operating with fault code B0005?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B0005?
DIY replacement parts average $38–$680, while professional service averages $108–$1620.
Will resetting B0005 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)