# OBD-II B0005: Collapsible Steering Column Deployment Control

> **Quick Answer:** OBD-II fault code B0005 indicates Collapsible Steering Column Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$1620.

- **URL:** https://faultcodes.org/automotive/obd2-b0005
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Some steering columns can change how much energy they soak up while collapsing in a frontal crash. In a Delphi/Nexteer patent a controller fires pyrotechnic actuators that force an absorber strap into a tighter path or couple in extra absorbers, matching the column to driver size and crash severity. B0005 is the restraint module code for the firing loop of such an actuator. Land Rover documents B0005-56, an invalid or incompatible configuration, on the Evoque from 2018 when a replacement restraints control module had received older software than the factory level; a manual patch of the diagnostic equipment fixes it (SSM 74577). FMVSS 204 caps rearward column travel at 127 mm when the car hits a barrier at 48 km/h. With the loop faulted, the column keeps its fixed default behaviour and the airbag lamp is on.

## Common Symptoms
- Airbag warning lamp on
- Adaptive energy absorption of the column unavailable, no effect on normal steering
- Safety note: the column actuator is pyrotechnic; leave tests and connector work to a workshop with the battery disconnected

## Most Likely Root Causes
- Restraint module configuration or software does not match the vehicle (Land Rover SSM 74577)
- Open or shorted lead to the pyrotechnic column actuator
- Faulty actuator in the steering column

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Collapsible Steering Column.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Collapsible Steering Column.
5. Clear fault memory and run a verification cycle to confirm B0005 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$680 | $108–$1620 |
| GBP | £30–£536 | £86–£1290 |
| CAD | CA$51–CA$914 | CA$145–CA$2175 |
| EUR | €35–€630 | €100–€1500 |
| CHF | CHF 40–CHF 725 | CHF 132–CHF 1980 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0005?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0005?
DIY replacement parts average $38–$680, while professional service averages $108–$1620.

### Will resetting B0005 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

