B0004 Fault Code: Driver Knee Bolster Deployment Control
OBD-II B0004 (Body Control, Airbag & Comfort): Driver Knee Bolster Deployment Control.
OBD-II fault code B0004 indicates Driver Knee Bolster Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$972.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- Body Control, Airbag & Comfort
- Professional Repair
- $108 – $972
What This Fault Code Means
A knee airbag, also called an active knee bolster, sits in the lower dash below the steering column. It fills the space in front of the driver's knees and holds the lower body back in a frontal crash, mainly for unbelted occupants. B0004 reports a fault in its firing loop. Mercedes-Benz stores B000413 for an open squib of the driver kneebag. Ford lists B0004:1A with the passenger knee code B0013 on the 2024 Ranger and traces it to certain airbag connectors, recognisable by a number moulded into the connector lock (TSB 24-2444). In an IIHS study of more than 400 crash tests, knee airbags brought only a small benefit for belted dummies. Still, the restraint module counts the loop as part of the system, and the airbag lamp stays on until the circuit is repaired.
Common Symptoms
- Airbag warning lamp on
- Driver knee airbag may not deploy in a frontal crash
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Most Likely Root Causes
- Faulty or loose knee airbag connector under the dash (Ford TSB 24-2444)
- Harness pinched or damaged during work below the steering column
- Internal fault in the knee airbag module
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside B0004.
- 2Inspect electrical connectors, fuses, and harnesses connected to Knee Airbag Module.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside B0004?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Knee Airbag Module.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Knee Airbag Module.
- 5Clear fault memory and run a verification cycle to confirm B0004 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $38 – $408 |
| Professional Repair (Parts + Labor) | $108 – $972 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: B0004 (Body Control, Airbag & Comfort)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $108 – $972
Frequently Asked Questions
Is it safe to keep operating with fault code B0004?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair B0004?
DIY replacement parts average $38–$408, while professional service averages $108–$972.
Will resetting B0004 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Body Control, Airbag & Comfort)