# OBD-II B0004: Driver Knee Bolster Deployment Control

> **Quick Answer:** OBD-II fault code B0004 indicates Driver Knee Bolster Deployment Control. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $108–$972.

- **URL:** https://faultcodes.org/automotive/obd2-b0004
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Body Control, Airbag & Comfort
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
A knee airbag, also called an active knee bolster, sits in the lower dash below the steering column. It fills the space in front of the driver's knees and holds the lower body back in a frontal crash, mainly for unbelted occupants. B0004 reports a fault in its firing loop. Mercedes-Benz stores B000413 for an open squib of the driver kneebag. Ford lists B0004:1A with the passenger knee code B0013 on the 2024 Ranger and traces it to certain airbag connectors, recognisable by a number moulded into the connector lock (TSB 24-2444). In an IIHS study of more than 400 crash tests, knee airbags brought only a small benefit for belted dummies. Still, the restraint module counts the loop as part of the system, and the airbag lamp stays on until the circuit is repaired.

## Common Symptoms
- Airbag warning lamp on
- Driver knee airbag may not deploy in a frontal crash
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

## Most Likely Root Causes
- Faulty or loose knee airbag connector under the dash (Ford TSB 24-2444)
- Harness pinched or damaged during work below the steering column
- Internal fault in the knee airbag module

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Knee Airbag Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Knee Airbag Module.
5. Clear fault memory and run a verification cycle to confirm B0004 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$408 | $108–$972 |
| GBP | £30–£321 | £86–£774 |
| CAD | CA$51–CA$548 | CA$145–CA$1305 |
| EUR | €35–€378 | €100–€900 |
| CHF | CHF 40–CHF 435 | CHF 132–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code B0004?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair B0004?
DIY replacement parts average $38–$408, while professional service averages $108–$972.

### Will resetting B0004 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

